A510SS Capabilities

Maximum Working Pressure 175PSI
Maximum Gallons Per Minute 82
Maximum Head Produced 105 ft.
RPM 3450
Maximum Seal Temp Buna-N 225˚F
EPT 300˚F
Viton 400˚F
Maximum Horsepower 2


Design Features


Constructed of cast 304 stainless steel. the discharge can be mounted in any 90˚ position. Drain and air ports are also positioned every 90˚, 1/4 npt suction and discharge tappings are standard. Back pull out design allows the pump to be serviced without disturbing the piping. The volute was designed to maximize hydraulic efficiency.

Mechanical Seal

Type 21 buna-n seal is rated 225˚F and pressures to 175PSI. Carbon seal face mates with the ceramic seat providing years of trouble free service. Alternate seals available upon request.


The hydraulic design of the impeller maximizes pressure and gpm while minimizing horsepower. The enclosed impeller is made of cast 304 stainless steel.


The precise machining of the adapter allows for easy assembly of the pump. a 1/8 npt hole is provided if a seal flush line is added. Construction consists of cast 304 stainless steel.


The NEMA 56J motor utilizes a 416 stainless steel shaft. The motor’s heavy duty ball bearings withstand axial and radial thrust loads with no problem. Standard enclosure type is drip-proof but alternates are available.


Pump Curve