RVP Overview

Available in simplex and duplex configurations

Capacities from 5000EDR to 65,000EDR

Pressures available in 20, 30 and 40 PSI

Design Features


A Cylindrical tank utilizes 304 stainless steel will give maximum strength and excellent corrosion resistance. The inner accumulator tank utilizes dished heads for maximum strength. The mounting feet will allow for an air gap beneath the unit for evaporation of spilled or condensed liquids. All connections and fittings which are welded to the tank are of a 300 series stainless steel.

Centrifugal Pump

The investment cast 304 stainless steel close coupled pumps utilize an enclosed impeller for maximum efficiency and durability. These vertically mounted pumps are bolted directly to the tank or an isolation valve to minimize space and air/steam binding.

Control Panel

The metal enclosure is rated for NEMA 4/12. Each pump has a motor starter with overload protection. A lockout rated main through the door disconnect allows for safe entry to the controls. Each pump has an accompanying green illuminated HOA/TOA three position switch. The primary and secondary controls are protected by circuit breakers.

Exhauster Assembly

the orifice housing is investment cast 304 stainless steel. The orifice plate and end cap are machined from 304 stainless steel. The exhauster is designed for maximum cfm to evacuate air quickly from the steam system to allow for quicker and more cost effective heating.


Vac Pump Capacities 1.JPG
Vac Pump Capacities 2.JPG